Date:         Tue, 25 Jul 2006 14:36:30 -0400
Reply-To:     Walt Oliver <walt@WALTNET.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Walt Oliver <walt@WALTNET.NET>
Subject:      Plumbing layout for headlight washers?
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Greetings, all,

I picked up a European washer tank with the high-pressure
headlamp-squirter pump along with the relay and wiring harnesses to make
it work. What I haven't found anywhere is a diagram or description of
whether the fluid circuit for the headlights includes check valve(s)--I
assume it must--and what their part numbers might be. Anyone have any tips?

The diameter of the hose from the high-pressure pump is huge compared to
those in my Saab or Mercedes. Wonder if VW expected Vanagons to get
especially dirty noses?

Thanks,
Walt

'91 Carat

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.