Date:         Sun, 23 Jul 2006 11:07:55 -0700
Reply-To:     Malcolm Stebbins <mwstebbins@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Malcolm Stebbins <mwstebbins@YAHOO.COM>
Subject:      Re: Poptop Canvas Install...help!
Comments: To: Geo & Kathleen Hahn <ahwahnee@CYBERTRAILS.COM>
In-Reply-To:  <44C3ABDE.3020508@cybertrails.com>
Content-Type: text/plain; charset=iso-8859-1

Here is my archive post:
http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0005C&L=vanagon&P=R18734

I'd attach the bottom of the canvas to where the nice (black) cord reaches the bottom rail and
them I'd loosen the top rail, 2 screws at a time, and pull the excess canvas though and re-attach
it, and cut off the excess.  I'd want the bottom to look  nice, as that's at eye level.   I hope
that is of some help.   Mine fit nearly perfectly.  M


--- Geo & Kathleen Hahn <ahwahnee@CYBERTRAILS.COM> wrote:

>  Here's the problem I'm having:
>
> With the top edge attached (aluminum rails) I am left with way more
> material than needed to reach the bottom rails.  I'm not talking about
> pucker or a bit of slack -- more like this thing hangs 2" too long.  If
> I attach the bottom rails as is I'll have a *very* baggy canvas.
>

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com