Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2006, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 1 Aug 2006 08:31:26 -0500
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Re: CV click?
Comments: To: Dennis Haynes <dhaynes@OPTONLINE.NET>
In-Reply-To:  <000a01c6b54e$e9ae0410$6400a8c0@MASTERPC>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Dennis,

Thanks. I guess I could have explained a bit more ias to what was happening during that little test.

Regards,

John Rodgers 88 GL Driver

Dennis Haynes wrote: > The real difference is the torque shift. The outside wheel in a turn travels > much farther than the inside. The outside wheel will see less torque with > the increase going to the inside wheel. > > More torque, more click. > > Dennis > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > neil > Sent: Tuesday, August 01, 2006 3:09 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: CV click? > > hmmm.... > > If going fast enough in a circle, the weight shift > (body tipping) would cause the angle of the axle would > change therefore stressing the internal components of > the CV at a different angle? > > > --- Tabe Johnson <greentabe-vanagon@YAHOO.COM> wrote: > > >> Can anyone clearly explain how this works? I know >> of this >> test on a front wheel drive car, where you're >> testing the >> outboard CVs, which have a much wider range of >> motion than >> the inboard ones and fail more often. But on a RWD >> car, what >> happens when you're turning that doesn't happen when >> you >> are going in a straight line? >> >> tabe johnson/87 westy >> >> >> >> *** cut here *** >> >> Date: Mon, 31 Jul 2006 22:05:13 -0500 >> From: John Rodgers <inua@CHARTER.NET> >> Subject: Re: CV click?? >> >> One way to test to see if CV's have reached their >> wear limits is to get >> into a large empty parking lot, crank the steering >> all the way to the >> stops to the left, then drive slowly around a full >> circle. If the CV's >> are worn they will click or knock, as it were. You >> will have to drive >> the circle both left and right to get a good >> confirmation. Be sure to >> keep the wheel at the stops. Power steering will >> protest, but it is the >> only way I know to do the test. >> >> If no click/knock, then they are probably OK. >> >> Good Luck, >> >> John Rodgers >> 88 GL Driver >> >> > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.