Rob Campbell wrote: > Trying to swap in a new fan temp switch on an 87 > Westy GL. Its in a > fairly inaccessable spot so it seems that a socket > needs to be used. > I took the switch to Sears and 2 FLAPS and couldn't > find anything deep > enough. It seemed to be a 27mm (maybe 29, I'm away > from my notes), > which I did find, but nowhere near deep enough to > fit over the plastic > plug section. It needs to be a seriously deep > socket. Try your local Home Depot - - they carry Husky brand sockets (out here at least); it was the only one I could find that was broached deeply enough to remove a fuel injector (without spending for a Snap-On). Good luck! Gary
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.