Date: Tue, 8 Aug 2006 00:51:36 -0500
Reply-To: joel walker <jwalker17@EARTHLINK.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: joel walker <jwalker17@EARTHLINK.NET>
Subject: Re: them led lights
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
... speaking of which, there is a small one-page how-to in the august
2006 issue of popular science (at your local newstands right now)
about making your own "led candles".
their cost, $3.33 and 15 minutes of your time (after you've gathered
all the parts).
supposed to last up to 36 hours on one 9v battery.
parts list ...
2 resistors:
1 each 100-ohm
1 each 220-ohm.
(doesn't say, but i'd imagine 1/4 watt rating would be fine).
cost about $0.19 each. radio shack.
1 9volt battery. $1. seems like they cost more than that around here.
1 9volt battery CLIP. $0.45. radio shack. this is the black plastic
thingie with the two metal grippers that attach to the 9v battery,
and has two wires coming out of the black plastic.
2 white 10mm, 18,000mcd LEDs. $0.75 each. might have to order these.
he used alan-parekh.vstore.ca claims they are the super-bright
kind.
? wire connectors (?), optional. $0.15
ah .. "white rubber sleeves" known as wire connectors.
says "soldering heat can ruin the LEDs".
the circuit is set up thusly ...
......(A)........resistor........(A)......
. ........resistor........ .
. .
. .
.+......LED 1 .
LED 1 .
.-......LED 1 .
.(B) .
.+......LED 2 .
LED 2 .
.-......LED 2 .
. .
.(C) .
. .
.-.....(shows red wire)...battery clip .
battery clip .
.+.....(shows black wire).battery clip .
. .
..........................................
so the resistors are in parallel. and notice there's no on-off switch
... apparently you're supposed to just clip it to the battery and let
it shine. one would suppose a small switch might run a whole nuther
dollar? :) but it would be the box to put all this in that would run
the price up to just about the same cost as those 3-led store-bought
kind.
but if you're in the mood to make it yourself, or build something
semi-permanent into the camper interior, this might be a good project
for you.
anybody want to figure out what resistors would be needed if you
wanted to run this off the house/car battery in the bus??
have fun! :)
unca joel