Maybe someone can shed some light on an indicator light problem I've had for a while. About a year ago, I swapped my instrument console for a spare one in order to gain a working gas gauge and instrument illumination. That part was a success, but in the swap I lost my coolant LED, turn signal indicator LED and high beam LED. Today I swapped out that instrument console for yet another one I'd collected. Now EVERYTHING works EXCEPT the turn signal indicator LED. Is that LED a common problem? Should I be looking for the wiring somewhere else? The only other two data points i have to offer on this problem are 1. When the parking brake is pulled up and the parking light is on, I can detect a very slight pulse during turn signal operation in the parking brake warning light and 2. The turn signals worked fine until I changed out the first module for the second about a year ago, which seems coincidental with a failure in the module but could possible be a pulled wire somewhere. Any ideas, anyone? Thanks, Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.