My filler tube inner thing seems to be stuck. Any advice? Doug Ezell Billings, Montana ----- Original Message ----- From: "John Rodgers" <inua@CHARTER.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, August 28, 2006 7:41 PM Subject: For the Newbies - Vanagon secrets revealed
> It appears there are a number of new list members, and it occurred to me > to pass this tip along to the new folk. > > New Vanagon Folk - the oil filler tube has a telescoping inner extension > to ease the filling with oil and avoiding oil spillage. Just remove the > cap, feel around the end of the tube, insert thumb insid the tube, and > fingertips at the rim of the tube, and pull. The extension should just > slide right out into position, allowing spill free oiling. When done > oiling, just push it back in. > > Good luck and many happy, trouble free miles with your new machines. > > Regards, > > John Rodgers > 88 GL Driver > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.