Date:         Fri, 25 Aug 2006 15:05:38 -0700
Reply-To:     Mike Miller <mwmiller@CWNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Miller <mwmiller@CWNET.COM>
Subject:      Frig fixed but...
Content-type: text/plain; charset="US-ASCII"

Frigid vanners,

I replaced the thermocouple on my frig and it now stays lit. Well for an
hour at least.

Next question:

I have the exterior cover, a metal plate with screw holes in it, a rubber
gasket that matches the holes in the plate and cover, a metal plate with no
screw holes in it just on hole for the exhaust I think.

I believe that the exterior cover, metal plate with screw holes in it and
gasket go on the outside of the van in that order outer to inner.

Where does the metal plate with no screw holes go, inside or out?

TIA

Mike

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.