Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2006, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 26 Aug 2006 10:18:12 -0700
Reply-To:     Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jake de Villiers <crescentbeachguitar@GMAIL.COM>
Subject:      Re: Broken timing gear?
Comments: To: George Thorburn <thorgk@accesscomm.ca>
In-Reply-To:  <008301c6c91f$3ddc1340$6e00a8c0@owner998c7c609>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

What a bummer!

If I were you I'd call Shane and Eddie at The Bug Shop and ask them about your situation. They are the top shop in BC for VW boxer motors and have more experience than all the rest combined. Many shops drop the motor and send it to the Bug Shop. They are usually in on Saturdays, although if they're super busy they may not answer the phone on Saturday.

I almost took our Golf to Auto Folks for a clutch, quite a few years ago, but ended up getting the work done elsewhere for reasons I can no longer remember. :-)

Call me if you need moral support or .......

Jake 604-812-7271

On 8/26/06, George Thorburn <thorgk@accesscomm.ca> wrote: > > My van died the other day. ('85 Westfalia with 1.9 WBX) > Every thing was running fine (we just drove 2000 km. without a problem) > when the van died. > When I tried to retart the motor it sounded as if the timing was > wrong. On investigation I found I was able to turn the rotor without > turning the motor. > I was near a Vanagon freindly shop so I had the van towed there. > The distributor is fine and the gear that drives the distributor looks > good (the drive gear was hard to pull out of the block). > The mechanic tried to reinstall the drive gear but it does not seat > properly, it will turn when the motor is cranked but it pushes up and bangs > on the bottom of the distributor. > Is it safe to assume that the brass gear on the end of the crank is > damaged? > Has anyone one on the list had any dealings with Auto Folks in Langley > BC. ( I will check Larry's list) > George > '85 Westfalia >

-- Jake 1984 Vanagon GL 1986 Westy Weekender "Dixie" www.crescentbeachguitar.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.