Date:         Sat, 26 Aug 2006 13:36:09 -0700
Reply-To:     Mike Miller <mwmiller@CWNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Miller <mwmiller@CWNET.COM>
Subject:      Re: Frig fixed but...
Comments: To: Jim Felder <felder@KNOLOGY.NET>
In-Reply-To:  <3FA419F0-F1CA-42DA-9ABA-3C48417F5976@knology.net>
Content-type: text/plain; charset="US-ASCII"

Yeah thanks, I need the manual. Or the guy what designed the frig. All the
help I can get.

At least it works now, if I start it on Battery first and let it cool for a
bit. And it doesn't leak propane. Both good things, right?

Thanks for the advice and manual.

Mike


On 8/25/06 4:02 PM, "Jim Felder" <felder@KNOLOGY.NET> wrote:

> Let me know if you need the Dometic manual in PDF form. It's written
> specifically for the vanagon and has a diagram that answers your
> question.
>
> Jim
>
>
> On Aug 25, 2006, at 5:05 PM, Mike Miller wrote:
>
>> Frigid vanners,
>>
>> I replaced the thermocouple on my frig and it now stays lit. Well
>> for an
>> hour at least.
>>
>> Next question:
>>
>> I have the exterior cover, a metal plate with screw holes in it, a
>> rubber
>> gasket that matches the holes in the plate and cover, a metal plate
>> with no
>> screw holes in it just on hole for the exhaust I think.
>>
>> I believe that the exterior cover, metal plate with screw holes in
>> it and
>> gasket go on the outside of the van in that order outer to inner.
>>
>> Where does the metal plate with no screw holes go, inside or out?
>>
>> TIA
>>
>> Mike
>>
>
>