Date:         Tue, 22 Aug 2006 20:40:32 -0400
Reply-To:     Mike Collum <collum@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Collum <collum@VERIZON.NET>
Subject:      Re: Fw: Name of fuel filler trim thingy majig
Comments: To: Ryan Shawley <easywind1975@HOTMAIL.COM>
In-Reply-To:  <BAY113-DAV947E4EE64802F7680B926DF470@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Ryan,

Here's a gif of an ETKA page showing the fuel filler housing.  The list
won't be able to see it, though.

Mike


Ryan Shawley wrote:
> ----- Original Message -----
> From: "bill" <easywind1975@hotmail.com>
> To: <gerry@gerry.vanagon.com>
> Sent: Tuesday, August 22, 2006 19:56
> Subject: Name of fuel filler trim thingy majig
>
>
>> What would be the proper name of the black trim piece that goes around
>> the
>> fuel filler opening, (surrounds the gas cap).  What might the part number
>> be?  After the three screws are removed how does it come out?  Mine was
>> not removed prior to the PO's repaint and is buggered up pretty good.  I
>> wasn't able to figure out how to remove it but I think it may be stuck
>> with paint. As always thanks for any and all replies.
>>
>> Ryan
>>
>>
>