One "Could" cut all the way down then, using a piano hinge, make a door for the opening which could be locked with desk drawer or filing cabinet type lock(s). Mike
JordanVw@aol.com wrote: > In a message dated 8/31/06 10:23:46 AM Eastern Daylight Time, > collum@VERIZON.NET writes: > > >> Did you cut all the way down to the wheelwell box or did you leave a bit >> of a lip there? >> > > > you leave a lip so stuff doesnt slide forward when you hit the brakes. > i did mine the same way. finished off the sharp edge with a piece of > extra front door inner weatherstripping (the stuff that goes up the B > pillar and holds your headliner to the B pillar) > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.