Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2006, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 30 Aug 2006 08:43:15 -0700
Reply-To:     Robert Fisher <refisher@MCHSI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Fisher <refisher@MCHSI.COM>
Subject:      Re: Re-useable oil filter
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

If you look at the Mann and Mahle filters (among others) in this guy's oil filter deconstruction, you'll see where he refers to the anti-drainback valves.

As for the hatch struts, if one is appreciably stronger than the other it is going to wind up carrying the bulk of the load- only when it gets sinks or lowers down to the weaker strut's catch point is the weaker strut going to pick up part of the load. You can see how this period of working solo when it's supposed to be working in tandem could potentially shorten its life.

Robert

----- Original Message ----- From: "Tabe Johnson" <greentabe-vanagon@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, August 29, 2006 9:34 PM Subject: Re: Re-useable oil filter

> Mike/List, > > This is a load of hokum that has been going 'round the list > for a while. The only valve in any oil filter is a bypass valve > which would activate itself if the filter media got too clogged to > pass enough oil, for instance. > > Let's see: How would a valve that kept the lifters from bleeding > down work? It would apply oil pressure. Where does oil pressure > come from? The oil pump. When the engine's off, the pump's off. > So when the engine's off, there's no oil pressure, regardless of > how many valves you have in your filter. > > tabe johnson/87 westy > > PS - speaking of hokum, (and I'm not trying to be aggressive - just > asking the question) how is it that replacing just one of the two > pneumatic rear hatch struts can cause it to fail prematurely? One > strut doesn't know what the other is doing. It's just applying > pressure to a piston, right? > > > > *** cut here *** > Date: Tue, 29 Aug 2006 21:58:33 -0400 > From: Mike Collum <collum@VERIZON.NET> > Subject: Re: Re-useable oil filter > > But what about the valve in the filter that keeps the lifters from > leaking down? > > Mike


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.