Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2006, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 12 Sep 2006 21:41:01 -0700
Reply-To:     Shawn Wright <vwdiesels@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Shawn Wright <vwdiesels@GMAIL.COM>
Subject:      Re: Heat Shields
In-Reply-To:  <71d9cdf90609121705j2da7f47alcabee628175c78a1@mail.gmail.com>
Content-type: text/plain; charset=US-ASCII

I found I could do a reasonable job of lubing them in place using a can of spray lithium grease and a straw - carefully push the straw between the bushing and shift rod and let loose. Of course, if the straw fits in there with room to spare, it's time for new bushings... ;-)

On 12 Sep 2006 at 17:05, Jake de Villiers <crescentbeachguitar@GMAIL.COM> wrote:

> That's a classic Lyle! :-) > > You're better off using lithium grease or my new favourite, Fluid Film, to > lube the bushing on the shifter shaft. Oil makes it swell and deteriorate. > > Happy Motoring! > > On 9/12/06, Marion Lathem <resiolute@copper.net> wrote: > > > > Well, I spent much of the day, building my heat shields out of aluminum... > > ! This afternoon, I was cleaning out the van as it's almost ready to go... > > waiting on the key part of the ignition switch. I was cleaning out the > > tools, left over hoses, as it had become the catch all of everything... and > > under a piece of old carpet, that had been in the van since I bought it. > > There was all three pieces I needed, the heat shields I frantically searched > > for everywhere. > > > > DUH... but as I look at them, I am not sure if I don't like mine better... but > > I will probably round up screws and put them on. Everything is working, all > > gauges seem to be working, and I lack checking the transmission oil... with > > the cat and exhaust on it sounds so pretty. > > > > The shifting is a bit balky, might need some oil on the grommets..? > > > > We will put insurance on it tomorrow, and I've worked so long on it, I'm > > almost afraid to get out and drive it.... put it on the road...afraid I > > might break it...loll...! > > > > I feel like I've just had a new baby....pass the cigars out....!! > > Lyle Lathem > > 1985 Vanagon GL > > It's Alive, I tell you..It's alive....! > > > > > > -- > Jake > 1984 Vanagon GL > 1986 Westy Weekender "Dixie" > www.crescentbeachguitar.com

Shawn Wright http://members.shaw.ca/vwdiesels '88 Westy 1.6TD 5 speed '85 Jetta Diesel 1.6NA


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.