Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2006, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 14 Sep 2006 22:18:39 -0400
Reply-To:     Helmut Blong <helmut.blong@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Helmut Blong <helmut.blong@GMAIL.COM>
Subject:      Fwd: Vacuum pump
In-Reply-To:  <450A0A46.7000305@verizon.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Good tips. Thanks.

---------- Forwarded message ---------- From: Mike Collum <collum@verizon.net> Date: Sep 14, 2006 10:04 PM Subject: Re: Vacuum pump To: Cc: Helmut Blong <helmut.blong@gmail.com>

One more thing, Helmut.

If the brake vacuum booster or a vacuum hose to it fails, your brakes would just be much less responsive as the "Vacuum assist" wouldn't be there.

Mike

Mike Collum wrote: > Helmut, > > Your sinking brake pedal is due to a bad master cylinder ... not the > vacuum booster. > > They wear their seals so that brake fluid leaks past them "Internally" > so you won't see a fluid loss. > > Mike > '84 GL 7 pass > '85 GL Westy > > > Helmut Blong wrote: > >> Thanks very much. Since your clever like that, what do you think is >> the most >> common cause for a sinking brake pedal? I figure vacuum as I am not >> losing >> brake fluid anywhere. It's a long run from engine to brake servo and I'd >> love to be able to narrow it down to common fault locations in that >> vacuum >> line. >> >> cheers, >> >> mordo >> >> ---------- Forwarded message ---------- >> From: Doug <vanagons@cox.net> >> Date: Sep 14, 2006 9:27 PM >> Subject: Re: Vacuum pump >> To: Helmut Blong <helmut.blong@gmail.com> >> >> Helmut, >> Yes, pump is for CC only, just follow the hose over to either the >> accumulator or actuator. >> Yes, vacuum from engine is ported through a one-way valve directly to >> the power brake servo. >> Good hunting, >> Doug in CT >> >> >> >> Helmut Blong wrote: >> >>> So, my search of Bentley and the archives seems to bear out that the >>> vacuum >>> pump is exclusively for the cruise control on my 90 Carat but I would >>> like >>> it if someone on list would confirm this. >>> >>> Ken Wilford's excellent posts on CC repair will be helpful when I >>> finally >>> tackle that beast. >>> >>> Power brake servo uses engine vacuum exclusively? >>> >>> cheers, >>> >>> mordo >>> >> >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.