Do you have a std or syncro? I've changed my front springs in my 2wd Westy a number of times. It is tedious, but easy. The trick is to get the front high enough so that the a-arm can drop free. I have photos of the procedure if you are interested. It is a great time to replace the suspension bushings while you are doing this. Todd '88 WEsty
-------------- Original message ---------------------- From: Warren Lail <vw.bus@MAC.COM> > I need to replace my front springs, but I'm not sure really how to go about it. > Has anyone done this recently or written it up? > > Just last month, I switched out the rear springs. All you have to do is to > disconnect the shock, jack the bus up so that the rear suspension hangs down, > and just pull the spring out. CV axles are not involved (for whoever asked). > You don't even need to remove the rear wheel. It took about 20 minutes total. > > But those front springs look a bit more complicated to get to. Help! > > Warren L. > 88 Westy "Billy Bones" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.