I bought one of these Motive pressure bleeders and I made sure it had a cap that fit prior to ordering (and it does). I paid about $45 for mine and I really do like it. One could be made using a garden sprayer, a gauge, some tubing, and an old brake reservoir cap. The time and parts needed to make one would soon add up to $45 dollars worth, though. Mike
Tim Demarest wrote: <snip> > ... the gotcha with these is that it > needs to come with a cap that will fit tightly onto the Vanagon master > cylinder so you can put pressure behind the fluid. <snip> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.