Date:         Mon, 18 Sep 2006 10:25:02 -0400
Reply-To:     Roger Sisler <rogersisler2000@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger Sisler <rogersisler2000@YAHOO.COM>
Subject:      Re: POR15 pictures of parts

Here are some parts I painted with POR15,over the weekend. Many are parts
that I sent to the list last week,only they haddent been painted.

The intake manifolds are3 form Vanagon 1.6 and Jetta 1.6. The only
difference is a little cut out on the flange at the far left.I think they
will interchange. POR 15 clear and then POR15 Sterling Silver.

The thremistat housingis from a 1.9 Finest anywhere? When I put it on ebay,
it will have new gaskets and all new highest strength bolts(10.9 grade).
All 6, and 6 washers. It is amazing how corroded this unit can get.

The diesel parts are the mounts and oil pan. Sharp ,and they will stay that
way. Not like paint from a spary can. When the engine gets dirty,the shine
will come back when washed.

Oil filler tubes are all the rage, now. They go for almost $100,in the
rough.Notice the new stainless steel bolts and washers.

Fuel filter mounts for diesel Vanagon.

Black stuff. Fuel pressure regulater.Blah ,blah, blah, pulleys,alt and a/c
compressor mount for diesel 1.6 ,radiater braces for late vanagon,shifter
mechenism for deisel jetta 5 speed,vanagon PS mount,a/c  belt
adjusters,more.

All going on ebay at     http://stores.ebay.com/rdsrds123