Anyone figure out what the increase would be? Mike On 9/25/06 8:49 AM, "JordanVw@AOL.COM" <JordanVw@AOL.COM> wrote: > i took a junk vanagon gas tank to my local welder and he thinks he can do > this.. i cut the tanks open, clean them out thoroughly, let them dry, and he > will weld them. if it is a sucess, would there be any interest in these? i > have a number of good gas tanks here that i could do this to.. > > basically we are talking about cutting the gas tank open on the top at the > perimeter of the "saddle" depression, and welding in new metal to replace the > area of the "saddle" (that vw should have eliminated with the demise of the > aircooled vanagon), therefore increasing fuel capacity of the stock 2wd tank. > > anyone interested? > > chris > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.