I have a method to deal with the larger Throttle Body Opening in my how-to on my page (at least it's worked for me since 1997).. Since Jeff is gonna use the 2.1 Plenum and Runners like I did, he shouldn't have a problem. -- Jim Thompson 84 Westfalia 2.1 "Ole Putt" 73 K Ghia Coupe "Denise" 72 411 Station Wagon "Pug" oldvolkshome@gmail.com http://www.oldvolkshome.com ********************************** On 9/27/06, ROBERT DONALDS <donalds1@verizon.net> wrote: > > the 2.1 air center section has 2MM larger runners and 5MM larger throttle > body opening > the 1.9 boots will fit > The 1985 air center section has the off set to match the 2.1 and does > bolt > up with no issues > have you realy bent the holders to work ? > > Bob > > > ----- Original Message ----- > From: "Benny boy" <huotb@VIDEOTRON.CA> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Wednesday, September 27, 2006 8:32 PM > Subject: Re: 1.9 and 2.1 Parts Interchangability > > > > The 1.9 Air plenium fit... kind of, you need to bent the small tab at > each > > end... you don't want to use a 2.1L intake!!!! not the same diameter at > > all! > > > > Ben > > http://www.benplace.com/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.