Date:         Sun, 24 Sep 2006 20:02:30 -0500
Reply-To:     Stephen Edwards <welfarewrkr@IGC.ORG>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stephen Edwards <welfarewrkr@IGC.ORG>
Subject:      Need advice for stripping parts
In-Reply-To:  <200609240008.1grlhF7xR3Nl3pv0@samuel.mail.atl.earthlink.net>
Content-Type: text/plain; charset=US-ASCII; format=flowed

Hi volks,

I'm in need of instructions on removing the steering transfer gear
(which according to Bentley "cannot be repaired") and the master clutch
cylinder.  This is a 90 Vanagon GL. I have the Bentley manual, which
could be a lot more helpful than it is! but that's all I have.

Also - and this is going to sound pretty daft - I cannot get the little
black plastic buttons off the inside panel on the rear door.  I am
assuming that behind these little black buttons are screws that fasten
the panel, which is that fiberboard stuff covered with a thin sheet of
plastic, also black, but when I try slipping a knife or other blade
under the edge of the button, I am unable to pop it off.  The buttons
are very thin and flexible, so they flex, but do not come off.

Your help would be much appreciated.

Steve