Date:         Sun, 24 Sep 2006 22:23:23 -0700
Reply-To:     John Bange <jbange@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Bange <jbange@GMAIL.COM>
Subject:      Re: Speedo needle removal
In-Reply-To:  <D0DFCA86-F0B8-4248-B181-C5EE5B5BDB03@mac.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

> There's no trick to getting it off. However, before you take it off,
> you might want to lift it over the stop pin and mark where it sits
> without tension so that you will be able to put it on back again in
> the same spot later.

Or you could use the little white line VDO put on the edge of the
gauge face for that purpose at the factory...

--
John Bange
'90 Vanagon - "Geldsauger"

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.