Date:         Tue, 26 Sep 2006 12:05:59 -0400
Reply-To:     Tim Demarest <tim.demarest@POBOX.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tim Demarest <tim.demarest@POBOX.COM>
Subject:      Re: Fwd: Vinyl mouldings ...
Comments: To: Helmut Blong <helmut.blong@GMAIL.COM>
In-Reply-To:  <de48c0be0609260843g4fcc82f2m80123f75b5c5d6f3@mail.gmail.co m>
Content-type: text/plain; charset=us-ascii; format=flowed

Actually, it seems like the easy t-molding (the one around the inside of
the door openings and along the edges of the rear shelf inside the hatch)
is real easy to find, so is the 'welt' where the cabinetry meets the side
of the van.

The other ones (the 'padded tee' on the stove cover edge, the seal around
the inside of the fridge door, and the very special edging on the doors
themselves) all seem to be made of pure unobtanium.

At 11:43 AM 9/26/2006 -0400, Helmut Blong wrote:
>Outwater Plastics (www.outwater.com) has all sorts, in all sorts of colors.
>
>Other sources would include cabinetmaking suppliers and RV dealers. Your
>local acrylic and plastics supplier may also have them in stock.
>
>
>
>
>---------- Forwarded message ----------
>From: Roger Sisler <rogersisler2000@yahoo.com>
>Date: Sep 26, 2006 11:20 AM
>Subject: Re: Vinyl mouldings ...
>To: vanagon@gerry.vanagon.com
>
>GW sells the table edge trim by the foot. Probably has this stuff,too.