In a message dated 10/1/06 8:34:43 PM Eastern Daylight Time, zolo@foxinternet.net writes:
> If you talk about the front door edge seal, that is between the body and > the > front edge of the front door, sticking out a little, then that is what I can > > tell about. > That seal is about two feet long and fits into a channel. One can pull it > out from the top and install it back after painting with some wd40. > Patience required. > Zolt, you must have the magic touch.. ive tried pulling the rubber seal out without removing that metal strip.. rips every time. i think flo is adding this to a pre-88 van, in which case he will need to get the metal strip that holds the rubber seal on as well... good luck..its a major b*tch to get out..ive never been sucessful at removing one.. chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.