>>did either of you orifice your temporary pipes? if i remember correctly >>this nipple is not full diameter. >>jonathan I did not, but noticed that the inside diameter of the copper tube is smaller than the steel tube that the mechanic used. (about 5/32" for the steel compared to 1/8" for the copper - not exact measurements - I checked by trying drill bits until I found one that would fit in the tube) What is the inside diameter of the stock nipple? George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.