> The front door edge seals are held in by two screws and one bolt on each > side. You will need to remove the door to get to them as the access hole is > obstructed by the hinge. > > there are four small 8mm bolts that hold these on each side. two are accessable thru the hinge bolt holes once the door is removed, the other two are not. in fact the only way to remove the other 2 bolts is with a flex joint extension, as theyre hidden behind the lip of the front clip. this is on a 90 vanagon i have here with the door off.. maybe other years use a different amount of bolts.. not sure. anyway i gave up removing them as i couldnt get at the heads for the other two bolts. chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.