Date:         Sun, 1 Oct 2006 10:01:00 -0700
Reply-To:     BenT Syncro <syncro@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BenT Syncro <syncro@GMAIL.COM>
Subject:      Re: 88-up flow-through parts
Comments: To: Florian Speier <groups.florian@gmail.com>
In-Reply-To:  <dad0e8a40609302152q6ec6d21bv6eddea834763991c@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

On 9/30/06, Florian Speier <groups.florian@gmail.com> wrote:
>
> Hi friends,
>
> I am currently having someone get the pieces out of his parts van to
> convert
> my van to 88-up flow-through. now as far as i know i need four pieces:
>
> the two back windows with the openings
> two mysterious seals in the front doors which reduce wind noise.
>
> now, a) is that all, and b) where exactlz are these seals?
>
>
> thanks
> flo



Flo,

The front door edge seals are held in by two screws and one bolt on each
side. You will need to remove the door to get to them as the access hole is
obstructed by the hinge.

Installation in a later van is a breeze as the holes are already
pre-drilled.

BenT