Date:         Sat, 7 Oct 2006 23:34:24 -0400
Reply-To:     Kim Brennan <kimbrennan@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kim Brennan <kimbrennan@MAC.COM>
Subject:      Re: brush guard/bull bars for vanagon???
Comments: To: JordanVw@aol.com
In-Reply-To:  <4a5.8d992df.3259c038@aol.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Not right away I can't. Too many things in the way....(vehicle is in
the garage and buried behind a lot of other stuff.)



On Oct 7, 2006, at 10:45 PM, JordanVw@aol.com wrote:

> In a message dated 10/7/06 4:11:43 PM Eastern Daylight Time,
> kimbrennan@MAC.COM writes:
>
>
>> Gary, the factory bullbars on my Tristar are attached underneath to
>> various bolts in the body on either side of where the spare tire
>> would fit. It then comes up in front of the bumper.
>>
>> Of course, a previous owner must have hit something as the wrap
>> around portion on the passenger side is bent in slightly. still it
>> isn't hitting any sheet metal.
>
>
> kim is there any way you can get some good pics of the mounting
> points?  i might end up making me own and would like some ideas on
> how it mounts...
>
> chris