I too, like the underwater epoxies out there on the market, but don't kid yourself about the marine epoxy actually bonding to the polyethylene plastic that the tank is made of. I think the reason your patch is "sticking" to the tank(as opposed to "bonding") is perhaps the epoxy was forced in the convolutions of the hole well enough that the wad of epoxy pushed through in some sort of hourglass(can't think of a better way to describe it) fashion where it is filling the hole and surviving the 14psi in the system for now. I'm glad to hear the marine epoxy is surviving the 200+ degree F temps. If the hole were small enough, I'd have been more tempted to ream out the hole with a small drill bit and run a stainless steel sheet metal screw in the hole and seal it with a rubber washer or silicone(might not even need the washer). Prolly didn't have the drill and such to do that fix on the side of the road though.
The only adhesive I've ever gotten to bond with polyethylene is a urethane based 2 part adhesive sold by the Old Town Canoe company for bonding kevlar felt grunch pads to the bottom of their cross linked polyethylene canoes. It involves polarizing the plastic by exposing the plastic briefly to the blue flame of a propane torch before laminating the material. Good surface prep is also required. the shelf life of this urethane adhesive is like 6 months, so storing in the tool box is not a great idea. I guess we've all been there. DM&FS At 01:01 PM 10/10/2006, John Meeks wrote: >Hi Folks ~ >Here's a handy item to have aboard. "Marine Epoxy Stick" from bondo. >After work Friday, I was stopped at a light when I noticed steam billowing >out of my side vents and back of the van. "Oh Crap" thought I. Major >trouble here. When I pulled over and popped the hatch, there was a small >stream of coolant squirting out the expansion tank just below the cap into >hot exhaust parts. Looking through my small box of repair items I found "the >stick", an item that had caught my eye in the Wal-Fart auto section a few >months before. > >After letting the engine cool, I filed off the crud around the hole and >cleaned out the crack. I cut off about an inch from the stick which is kinda >like a white tootsie roll in consistancy. Kneeded the piece till it was nice >and uniform feeling and jammed the stuff into the crack, spreading it out to >feathered edges into about a 1 by 2 inch oval shape. Just like putty. Let >dry for an hour and it's rocklike. > >I've had no leaks while I wait for a replacement tank and I've driven over >many miles of milled pavement which really vibrates everything. This stuff >would work for many of the plastic parts in our systems and I can say it's >worth having along... > >Safe Travels, >John Meeks > >Vanagon Rescue Squad >http://www.vanagonauts.com/Vanagon_Rescue_Squad74.htm > >'91 Westy MV >'85 GL "Byron" >Top o' Northern Michigan >KC8ZFN > > > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.1.407 / Virus Database: 268.13.1/466 - Release Date: 10/7/2006
-- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.407 / Virus Database: 268.13.1/466 - Release Date: 10/7/2006 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.