That's, what I did also. I also used the tiny plastic tubing they sell at NAPA to mount the oil pressure gauge sending unit under the coil. There were two convenient OEM holes there that were already threaded. http://neksiwel.20m.com/cgi-bin/i/images/oil_sender.jpg I need to update this picture because I have since added a tee to include the stock pressure switch. Ken Lewis http://neksiwel.20m.com/ ----- Original Message ----- From: "Mike Collum" <collum@VERIZON.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, October 11, 2006 7:44 PM Subject: Re: [VANAGON] oil pressure problems,still
>I have purchased an M-10 X 1.0 to 1/8 NPT 27 adapter for installing my > oil pressure gauge extension hose which is similiar to the one in this > link: > > http://www.egauges.com/vdo_acce.asp?Subgroup=Mech_Temp_Adapters > > That way I'll keep my engine's threads stock. > > Mike > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.