So, with all the input on printing a little laser off deep cycle... 3000 watt Wagan inverter... under the rear seat, passenger side two 110 amp hour batteries under the rear seat, middle position [propex heater will be under the rear seat, on driver side] solenoid or high capacity relay instead of the hella relay, between main and rear batteries 10 guage wire, maybe 8 guage, to the two rear batteries (want a fast charge, but not too fast) 6 guage wire to the inverter relay between alternator and main sttarting battery car style female plug, w 4 inputs, between front seats, conected to rear batteries 120 watt solar panel, would prefere flex material, but not sure on availability... maybe an inkjet printer for nonmagnetic printing grow lights and a hydrophonic system |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.