Dug into the missing high beam today and here's what I found: - grounds on both sides appear OK. Tested left high-beam on right ground and OK, left on right + fails. - removed all wired from the plugs and inspected. Look OK - voltmeter shows 12v on left side, and that or slightly higher on the right (why would it be higher??) - meter I have can't check amps so I'm sidelined until I can get one. This van is completely stock - if the problem isn't the wired themselves, would a relay kit have any effect? I'm planning to install one anyway, but would do it sooner if it would help. john |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.