Date:         Thu, 12 Oct 2006 12:29:25 -0400
Reply-To:     Bostig Eng <syncrolist@BOSTIG.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bostig Eng <syncrolist@BOSTIG.COM>
Subject:      Re: Bostig zetec kit, clearance
In-Reply-To:  <6069-452E50DE-457@storefull-3158.bay.webtv.net>
Content-Type: text/plain; charset="US-ASCII"

Hey Guys,

Here is a pic from another angle of the very same van in the first pic in
the grass that looks like it is dragging.

http://www.bostig.com/files/bobunderneath.jpg



________________________________________
Bostig Engineering
Engine Systems Voodoo
http://www.bostig.com/
617.272.3800



-----Original Message-----
From: Bob Mac [mailto:BOBMACDOWELL@WEBTV.NET]
Sent: Thursday, October 12, 2006 10:28 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Bostig zetec kit, clearance

   That was my bus you were looking at.  The actual ground clearance is
6 inches to the bottom of the oil pan. Bostig offers an oil pan that
will give you another inch of clearance. I myself did not think this was
a big issue so i opted out of the oil pan. With the oil pan you would
have 7 inches of clearance. The transmission oil pan is only 8 inches.
For most road conditions 6 inches is plenty of clearance. Their are a
lot of new cars out there that have a lot less clearance than that. If
anybody wants to check this out i'll be at busses by the depot this
weekend. I'll try not to park it in the mud with 6 inches of grass so it
doesn't look so bad.
    I might add that this van is such a pleasure to drive now that i
can't get enough seat time in it. I'm almost ready to weld the hood
shut. Catch you all at BBD