Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2006, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 12 Oct 2006 16:35:22 -0500
Reply-To:     Max Wellhouse <maxjoyce@IPA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <maxjoyce@IPA.NET>
Subject:      RE : Ticked Off at oil filter adaptors
Comments: To: "Chasteen, Jonathan M. MM3 (CVN69)" <chastejm@CVN69.NAVY.MIL>
In-Reply-To:  <3E5078FE01D80443B4B35521CD057E9201D2D01F@cvn69ucsex1.cvn69
              .navy.mil>
Content-Type: text/plain; charset=us-ascii; format=flowed;
              x-avg-checked=avg-ok-181A2CFA

I had one on my 79 loaf for a while but reducing the AN 10 fittings was a hassle in cramped quarters. It's in a box somewhere in the shop. In my 2nd gen.system, I didn't worry about whether the oil went to the filter first or not as the thermo was cold, the oil automatically went to through the filter until it hit 165F and then full flowed at185F. I used a speed shop block off plate for the filter mount on the engine and then ran teflon hoses to an external in line filter that then went to the cooler. It had an amot thermostat in line and a bypass hose for the cold times. I had a shop modify a Harrison AC evaporator by welding on two aluminum 1/2 NPT female ends on it and from there I rigged the bypass and had a fortune in the Aeroquip hose. The type four rebuild lasted over 100k, so it was worth it.

DM&FS

At 11:47 PM 10/11/2006, Chasteen, Jonathan M. MM3 (CVN69) wrote:

><snip> > > I wish they would design a thermostatically controlled sandwich >adaptor that allows oil to flow through the filter before going to the >cooler then back to the engine. > ><snip> > > > >If you go to the Pep Boys and look in the section for transmission oil >coolers they sell an engine oil cooler kit that comes with a >thermostatic bypass plate and numerous adaptors to fit different oil >filter threads. I installed one of these on my G60 Corrado a few years >back and it worked great you could watch the oil temp decrease on my >autometer gauge when the thermostatic bypass opened up. > > > >jonathan > > > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.1.407 / Virus Database: 268.13.1/466 - Release Date: 10/7/2006

-- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.407 / Virus Database: 268.13.1/466 - Release Date: 10/7/2006


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.