Date:         Fri, 13 Oct 2006 19:37:34 -0700
Reply-To:     Robert Fisher <refisher@MCHSI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Fisher <refisher@MCHSI.COM>
Subject:      Re: Speaking of Painting...
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

I have a similar crunch zone on my van except it's on the front of the
sliding door and on the piller below the fuel inlet. That'll be a fun one to
fix. The dent did something really strange to the inside of the sliding
door... the door works fine and isn't misshaped but the inner panel won't go
on, as the middle horizontal support inside that is apparently 'glued' to
the skin popped off and bowed inwards.

From the looks of it that dent isn't going to be too difficult to fix... You
could buy a lot of decent body tools and beer for what they quoted you and
still have plenty left over for the paint job if you were so inclined, and
when it was over you'd still have the tools (but not the beer).

Cya,
Robert

----- Original Message -----
From: "Tom Salicos" <Tom@SALICOS.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, October 13, 2006 5:11 AM
Subject: Speaking of Painting...


I broke my van.  Got in a hurry leaving the gas station and one of the white
posts that protect the pumps jumped out into my path.  Guess how much this
little scrape will cost to fix:

http://www.salicos.com/Damage.htm


Tom Salicos