The only pressure there will be the crankcase vent pressure. Any pressure measured is the result of a blocked breather or excessive blow by from bad rings or pistons. There is quite a bit of splash there. Maybe a place for oil temperature. Dennis ----- Original Message ----- From: roger sisler Date: Monday, October 16, 2006 11:00 am Subject: Oil pressure questions again To: vanagon@GERRY.VANAGON.COM > Yeah,it's me. Look, I ordered that sandwich plate, and the 1/8 > inch npt to m10 adapter. All is well and I am awaiting > delivery.HOWEVER, while disassembeling my parts van for > disposal,I noticed that the fuel pump block off plate may access > the case. Could a drilled hole and 10mm 1.0tp threads allow a > oil pressure sensor or other oil sensor to be installed ok in > this block off plate? > > --------------------------------- > Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. > Great rates starting at 1¢/min. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.