On 10/17/06, Joy Hecht <jhecht@alum.mit.edu> wrote: > > I've got a propex too. It does put out good heat - but if the bed is > open, > I find the heat sits under the bed and doesn't get to me!
I have a somewhat similar problem with my Propex, mounted in the same place. Check the rotation/orientation of the heat vent. It turns and will direct the heated air. I've set mine to blow as straight out as I can and that helps. I've also found that I am getting heated air flowing back over the bed area but it is disbursed and that area heats up slowly. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.