Date:         Mon, 16 Oct 2006 19:46:45 -0400
Reply-To:     Roger Sisler <rogersisler2000@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roger Sisler <rogersisler2000@YAHOO.COM>
Subject:      Re: For Sale Plastic coolant tubes that fit the 83.5 to 85 with a
              1.9

They are 10 feet long!!!!!   Includes the 3 stainless steel wire bails that
attach tehm to the frame. My early 85 that came with steel tubes ,had the
slots for these bails.Dont know about 83.5 or 84. It is not difficult to
reuse the steel bands that the steel coolant tubes use for this. It was a
snap to install them.Gotta remove the gas tank,though. Good time to reseal
it. Also to put in new PS lines. I have them too.And many other low mileage
stuff from this Vanagon. Here is a partial list,working from the front to
the back of the Vanagon:: Front condenser,complete front suspension with
62K with cast iorn lower control arm( may be worth installing with existion
balljoints and bushings),bumper is in  good condition w/good
chrome,radiator fan/schroud,PS lines,gas tank plastic stuff for
resealing,Fuel pump/mount,Automatic transmission shifter and shift
rod,cables,glove box,dash cover(brown)Front window glass and vent
wings,side slider windows,rear side windows,sliding door hinges and
rollers. steering column cover(brown),various interior trim, igniton switch
and door handles and rear hatch lock(with key),Batery cables.Neg and
positive(7 ft long!!!),Ps pump and hoses, Alt and mount, PS  fluid
resovour, intake runners,Starter for autometic, flex plate, torque
converter,final drive w/62K,valve body for trans,thermistat housing, upper
and lower coolant cross over pipes,3 groove pulley,auxillery air
regulater,dist,breather tower, (((two rear hubs with new brake shoes/slave
cylinders/cv axels for automatic cleaned and regreased, parking brake
cables,inner outter grease seals( all as one unit. Replace all with one
fell swoop- good for ahigh mileage vanagonwith automatic-includes
wheelbearings for rear)(I said it was ready for inspection)))),Dip
stick,two cylinder heads with 62K (needs JB welding for the
pitting),Pistons can be used for ash trays if your single :>),blah blah
blah,Various other items that need a new home.