True, the AFM doesn't produce voltage. The question is really, what signal, measured in millivolts, does it return to the ECU? This is important because the signal returned to the ECU, along with other data, tells the ECU what air/fuel mixture to send into the cylinders. It seems to me that for any given set of conditions (say, trying to accelerate up a 3% grade at 3100 RPM in fourth gear) the signal returned to the ECU should be constant. Otherwise, the engine will be running too rich or too lean. If the millivolt signal didn't really matter, it seems the VW engineers could have designed a device much less complex than the AFM, or eliminated it altogether. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.