Mark - I have a pic of the back of my van with the hitch installed on the blog. Clicking on the pic will enlarge. Probably not not the amount of detail you need. For the fiberglass bumpers - Installation is basically removal of the bumper from the van - Detaching the fiberglass bumper from the stock mounts and mounting the Fiberglass bumper on the haynes hitch [ small slots need to be cut in the fiberglass bumper] And reinstall the haynes hitch with attached fiberglass bumper where the stock mounts were.
[october 21st] Pic http://photos1.blogger.com/blogger/7485/2090/1600/IMG_0010.1.jpg
Tom Myers Rochester NY 90 Westy 91 Syncro
> From: Mark C <obeechi@RUNBOX.COM> > Reply-To: <obeechi@RUNBOX.COM> > Date: Tue, 7 Nov 2006 00:54:08 -0800 > To: <vanagon@GERRY.VANAGON.COM> > Subject: Dennis Haynes Class 3 Tow Hitch > > Anyone have any pics of one of these installed?... thanks... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.