Date: Wed, 1 Nov 2006 18:45:49 -0500
Reply-To: neil <goofymuso@YAHOO.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: neil <goofymuso@YAHOO.CA>
Subject: Re: Wheel stud supplier in Vancouver BC
In-Reply-To: <bfb5ccc40611011441q2f79d087gcb4477fc09961927@mail.gmail.com>
Content-Type: text/plain; charset=iso-8859-1
Hi.
Would order from a vendor such as Bus Depot, but
wanted to get job done asap. Since they are in U.S., I
assumed shipping would take too long...... border and
all.
Thanks for info re CIP studs. It looked like the EMPI
ones would fit even though too long. I figured I'd
cut/grind blank end (or leave as is? No harm?) as it
looked like threads are long enough.
And thanks for quick check w/VWOA. Oddly enough, the
local VW dealership in North Van said he had no stock
and he'd have to get them from U.S. Hmm.....
Cheers,
Neil.
--- Old Volks Home <oldvolkshome@GMAIL.COM> wrote:
> Why not just get the right studs from Bus Depot (or
> more expensively from
> the VW Dealer)?
>
> 211 501 627 A - 34.5mm (1.36") long - $3.95usd ea
> (Dealer gets $11.25usd
> ea!)
>
http://www.busdepot.com/details.jsp?partnumber=211501627A
>
> A quick check with my VWOA contact says:
> 1 - Vancouver Depot
> 65 - Toronto Depot
>
> Call Bus Depot and see what they have or can get
> with that same VW number.
>
> It's possible that Dorman, a major US manufacturer
> of wheel studs for the
> aftermarket *may* list this, but I don't remember
> ever seeing it in their
> catalogs. The wheel nuts (N0201121) are much more
> readily available, such
> as at Bus Depot:
>
http://www.busdepot.com/details.jsp?partnumber=N201121
>
> Don't even think of using the pieces that CIP offers
> - incorrect length to
> start
>
with.<http://www.airheadparts.com/viewDetail.asp?strMasterCat=&idproduct=6201>
> --
> Jim Thompson
> 84 Westfalia 2.1 "Ole Putt"
> 73 K Ghia Coupe "Denise"
> 72 411 Station Wagon "Pug"
> oldvolkshome@gmail.com
> http://www.oldvolkshome.com
> **********************************
> On 11/1/06, neil <goofymuso@yahoo.ca> wrote:
> >
> > Hi all.
> >
> > I need new rear wheel studs/nuts for stock wheel
> > setup.
> >
> > Nothing at Bow Wow. Called California Imports and
> was
> > advised by helpful CI rep that:
> >
> >
>
http://www.cip1.ca/ProductDetails.asp?ProductCode=C13%2D9515
> >
> > or
> >
> > http://www.cip1.ca/SearchResults.asp
> > Search=c13-70-2850&Search1=Search
> >
> > might fit.
> >
> > Anyone used these? If not.....
> >
> > Is there a suitable substitue (for different make)
> > available at a local FLAPS that will work?
> >
> > Anyone know of another VW supplier (not dealer) in
> > Vancouver BC that would have studs?
> >
> > TIA,
> >
> > Neil Nicholson.
> > 1981 Air Cooled Westfalia.
> >
> > http://web.mac.com/tubaneil
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com