Date:         Thu, 9 Nov 2006 16:29:34 -0700
Reply-To:     Richard A Jones <jones@COLORADO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Richard A Jones <jones@COLORADO.EDU>
Subject:      storage space lost by Propex
In-Reply-To:  <20061109224613.C22ECF8897@mx10.Colorado.EDU>
Content-Type: text/plain; charset=ISO-8859-1

> Are you able to effectively use the storage space around/over where you
> have your propex installed?  I'm considering a propex and curious as to
> how the underseat area can be used with it installed there.

Check:
http://www.sittser.com/P4Pictures.htm
for pictures of a Carver installation.  A Propex should fit about
the same.

I installed my Carver exactly the same as Sittser.  Then I made a
plywood "lid" that is exactly the same height as the VW heater box.
It rests on some angles and is about an inch above the heater.  So
I still have lots of storage on top of this lid and the VW heater.

                                Richard A Jones
                                Boulder, Colorado