Date:         Wed, 29 Nov 2006 00:30:07 -0800
Reply-To:     Robert Keezer <warmerwagen@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Keezer <warmerwagen@YAHOO.COM>
Subject:      Re: was: co/propane RE: propex
In-Reply-To:  <022f01c71371$ccb67410$0301a8c0@beast>
Content-Type: text/plain; charset=iso-8859-1

I installed a Propex in the small cabinet next to
the water tank.

I removed the partition first. The circuit
breaker was removed, and hole for the breaker
became the heat outlet.

I had to remove the z-bed. I consider this the
most difficult installation, but the most space
saving, because you don't lose any space that
your were using before.

I remounted the circuit breaker just inside the
door.

The other difficult part about this installation
is connecting the gas. I should  have made the
connection to the heater made first and used
flexible hose instead of copper tubing.

Robert

1982 Westfalia



--- Bostig Eng <syncrolist@BOSTIG.COM> wrote:

> Speaking of which... do we have a favorite
> location for installing propex
> units? I'd love to here from folks who've
> installed them, where in the van,
> and why in that location.
>
> Thanks!
>
> Jim
> ________________________________________
> Bostig Engineering
> Engine Systems Voodoo
> http://www.bostig.com/
> 617.272.3800
>
>
>





____________________________________________________________________________________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com