hey all, My acc cable has been freezing up on my syncro. I took apart the assembly under the pedal cluster and cleaned up that linkage. I disconnected the cable in the engine case and under pedal assembly. I could barely get the throttle cable to move freely, so obviuosly, it is pretty gunked up inside the tube. whatever the gunk is, is freezing and causing my cable to stick. so what is the procedure here? bentley is no help. In replacing the cable is the tube also replaced? can I remove the cable and flush the tube with compressed air or something? I am worried that i will not be able to get cale back thru. What is the method here? Thanks jason 87 syncro westy _________________________________________________________________ Visit MSN Holiday Challenge for your chance to win up to $50,000 in Holiday cash! http://www.msnholidaychallenge.com/default.aspx?ocid=tagline&locale=en-us |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.