If this is a federal van ( non cal ) then the points plate is flopping around or the spring under the dist is missing and this would let the drive bounce and the timing would change Bob
----- Original Message ----- From: "Nathaniel Poole" <npoole@TELUS.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, December 18, 2006 8:26 PM Subject: Sloppy timing?
> Setting the timing on my '80, it kind of bounces around a bit, a few > degrees > either way. I haven't had to do a manual timing in decades and don't > remember if this is normal. Time for a distributor rebuild? > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.