Yeah the two pivots look fairly easy, but what about the latch that holds the window closed? How does that come off the window? Chris On 12/20/06, Paul Guzyk <paullist@guzyk.com> wrote: > To get the vent windows off the van just unscrew the two Torx bolts > that hold the glass to the mounts, then the glass just pops out. > > And if you don't have a Torx bit, I've even used a small slotted > screwdriver instead of a Torx and have also used a quality (i.e. > genuine) Vice Grip on the tiny edges of the bolt against the glass > (perpendicular to the the glass) but a Vice Grip can bugger up the > bolts if you are not careful. > > >I want to take the vent windows off completely and have them re do > >them. How easy is this to do? > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.