Date:         Tue, 19 Dec 2006 11:24:15 -0800
Reply-To:     Mark Drillock <mdrillock@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mark Drillock <mdrillock@COX.NET>
Subject:      Re: need stabilizer link
Comments: To: Jake Beaulieu <jbeaulie@ND.EDU>
In-Reply-To:  <vanagon%2006121914071514@GERRY.VANAGON.COM>
Content-Type: text/plain; charset=us-ascii; format=flowed

Note that what was welded on was a new allen head bolt of the right size
and thread.

Mark

Jake Beaulieu wrote:

> I have done a bit of digging around in the archives and found that many
> people have successfully welded the threaded rod back onto the link.  Here
> is a link to a picture of a stabilizer link repaired this way
>
> http://jones.colorado.edu/jones/droplink.jpg
>
> My local machine shop will do this for a couple of bucks, so I'll give it
> a shot.
>
> Thanks for the info,
> Jake
>

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.