Date:         Thu, 28 Dec 2006 01:32:52 +0800
Reply-To:     BenT Syncro <syncro@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BenT Syncro <syncro@GMAIL.COM>
Subject:      Re: 89 vanagon pwr mirror troubleshooting question
In-Reply-To:  <vanagon%2006122616194199@GERRY.VANAGON.COM>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

On 12/27/06, Roger Sisler <rogersisler2000@yahoo.com> wrote:
>
> Hello, The two wire connector is for the heated mirror,I believe.Follow
> the wide spade connectors and see if they go to the glass.I think it is
> heated anytime the engine is running.


The heating element on the powermirrors are supposed to be hooked up to the
circuit powering the rear window defroster. In other words, it's not on all
the time when the engine is running.



--
BenT

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.