J-B Weld might be disappointing in this case in that it has a max temperature of 500º F. Mike
Sudhir Desai wrote: > high-temp epoxy is my weapon of choice in these matters :) > next is jb-weld. > sudhir > > On 1/5/07, Gerald Masar <azsun99@earthlink.net> wrote: >> This message certified free of any stainless steel content. >> >> '88 Westy, 54K miles, original muffler has a small hole (at least as >> far as I could >> see) about ½" wide on the cat end, near the base of one of the >> supports for the flange >> where the cat attaches. Any ideas for patching it? High temp epoxy? >> Welding? The >> muffler otherwise appears to be in pretty good shape with just some >> surface rust. >> Thanks, >> Jerry in Arizona >> > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.