Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2007, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 2 Jan 2007 16:28:34 -0700
Reply-To:     Tom Buese <tombuese@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Buese <tombuese@COMCAST.NET>
Subject:      Re: Tach install from vanagon to vanagon
Comments: To: Mark Drillock <mdrillock@COX.NET>
In-Reply-To:  <459AE72F.3030001@cox.net>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

On Jan 2, 2007, at 4:13 PM, Mark Drillock wrote:

> The simple way is to compare the wire colors in each hole of both > 14 pin > connectors. Move the wires on the clock dash model to the same > positions > as the tach model 14 pin connector. The connector opens up at the wire > edge and the pins slide out and in. You will need to combine the 2 > brown > wires onto one pin and place it where the tach dash has it. Then > use the > extra cut off brown wire stub and it's pin to connect a new long green > wire back to the coil. Plug this spliced green/brown wire into the > hole > where the green wire is on the tach dash 14 pin connector.

Yep, that's what we did, basically, after screwing around a bit.

You can always count on Mark for great practical how to info! I should have asked before we did it!

Thanks,

Tom B.-eyes to old to see wire colors in holes w/o help > > VW keeps the same color wires for the same functions on almost every > Vanagon. The position and such changes but the colors don't. > > Unhook the battery ground strap when doing the wire relocation. One of > the wires is always live. > > Mark > >> Date: Sat, 30 Dec 2006 17:28:32 -0500 >> From: Jonce Fancher <streetbugs@WHISPLLC.COM> >> Subject: Tach install from vanagon to vanagon >> >> Hi all >> Well I aquired a 84 wolfsberg vanagon and it has the stock tach in >> the dash >> pod. I will be parting out this vanagon and then off to the >> crusher but it >> has a tach that I want to know if it is just a straight swap to my >> 84 GL. My >> vanagon has a standard Clock. Will the harness already have the >> wiring for >> the tach to work?? >> >> Jonce Fancher >> >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.